click any smaller picture to
view a larger picture
Shot of the Saw Mill Complex in progress
Another shot of the Saw Mill Complex in progress, this
time from the other side, taken from the middle of the table
Turntable and Roundhouse after being ballasted
Another shot of the Turntable and Roundhouse after
being ballasted and detailed
Here is a picture of the Turntable with the table out,
you can see the pit and ball bearings
Here is a closeup shot of the microswitch, this is
what causes the Turntable to index, that is, stop lined up with
the appropriate sidings. Small pegs on the underside of the table
trigger the microswitch
