;Tomix TCL File c001250 from TOMIX TNOS Update 201902
;Comments translated by Richard D. Kerr  Rev. 2020-07-16

SW 1      ;Control Unit Display Time is set to 1 second

SF 3      ;Frequency is set to 3 (200Hz)
DF        ;Display the Frequency

PC 0,1    ;Parameter Set 0 is copied to Parameter Set 1
PS 1,1,3  ;Parameter 1 of Parameter Set 1 is set to 3 (constant lighting) 
PA 1,1    ;Parameter Set 1 is assigned to Train 1

PC 0,2    ;Parameter Set 0 is copied to Parameter Set 2
PS 2,9,30 ;Parameter 9 of Parameter Set 2 is set to 30 (stop time)
PA 2,2    ;Parameter Set 2 is assigned to Train 2

SR 1      ;Repetition Count is set to 1
DR        ;Display the Repetition Count
ST 0.30   ;Repetition Time is set to 0 minutes 30 seconds
DT        ;Display the Repetition Time

SA 1      ;Automatic Operation Mode is set to 1 (continuous operation)
DA        ;Display the Automatic Operation Mode

WK        ;Wait for Keypad Start/Resume button to be pressed

RN        ;Start running

WM 0.5    ;Wait Time is set to 0 minutes 5 seconds

SA 0      ;Operation Mode is set to 0 (Forwarding Mode)
SM 1.1,3  ;Origin sensor is set to S1-1 with Option 3 (Reverse)
SM 1.3    ;Destination sensor is set to S1-3
SM 1.4    ;Destination sensor is set to S1-4
RN        ;Start running

PA 2,1    ;Parameter Set 2 is assigned to Train 1
SA 0      ;Operation Mode is set to 0 (Forwarding Mode)
SM 1.2,2  ;Origin sensor is set to S1-2 with Option 2 (Forward)
SM 1.3    ;Destination sensor is set to S1-3
RN        ;Start running

PA 1,1    ;Parameter Set 1 is assigned to Train 1
SA 0      ;Operation Mode is set to 0 (Forwarding Mode) (Start running)
SM 1.4    ;Origin sensor is set to S1-4
SM 1.2,6  ;Destination sensor is set to S1-2 with Option 6 (End movement)
RN        ;Start running

PA 2,1    ;Parameter Set 2 is assigned to Train 1
SA 0      ;Operation Mode is set to 0 (Forwarding Mode) (Start running)
SM 1.3    ;Origin sensor is set to S1-3
SM 1.4    ;Destination sensor is set to S1-4
SM 1.1,1  ;Destination sensor is set to S1-1 with Option 1 (stop)
RN        ;Start running

PA 1,2    ;Parameter Set 1 is assigned to Train 2
PA 2,1    ;Parameter Set 2 is assigned to Train 1
;end