Bear mountain tculvert
The
Culvert at
Bear
Mountain
To
Build this Culvert, I gathered some
small
rocks about 1/2 to 3/4 inch in size.
I
then used "Goop" to make a rock wall
about
4 scale feet high. In the middle of this
wall,
I put a 5/8 inch x 6 inches, brass tube.
This
will be a drain for water along the tracks.
I
then installed the culvert and ran a drip line
down
to the pipe. The drip line was buried so
to
hide where the water came from.
~~~
Photo
#
1
Photo
#
2
Photo
#
3
Switching Yard 
Built 12 June 1999
