Set #1
Pennant heralds, both outline and solid, in 24-, 27-, 30-, and 60- sizes with white lettering.  This is the flag pennant and does not additional letters or numbering.  This set can be used on a number of different cars.

Set #2
Compass heralds (one inch) in 15-, 24, 39-, 42-, and inch sizes with black lettering in the compass.  No lettering or numbering, just the Compass herald.  This set also includes the correct two-color Compass for the GP-35 locomotives.

Set #3
Compass heralds in the same sizes as Set #2 but without two-color Compass herald.  Set has white lettering on the Compass.

Set #5
 Ann Arbor RR Blue/White/Gray RS-1 and Black S-3 Switchers.  Set includes yellow and white colors.

Set #6
 This set provides the lettering for any of the orange paint schemes on the Ann Arbor RR also PS=1's and S-3 switchers.

Set #7
 This set is for the Dundee Cement Car, a 70-ton ACF Coverred Hopper.  This was not an Ann Arbor car.  This set contains only the letting DUNDEE CEMENT but the diagram that comes with the set shows other information that you need and can find on commerial sets.  One set does one car.

Set #8
 This decal set contains the lettering, numbers, flag and compass herald to do the Ann Arbor steel caboose.  One set can can do one or two it used carefully.

Set #9
 This set is for the Ann Arbor RR FA-2's.  Yellow lettering and numbers and White numbers.  One Blue Flag for the front of the locomotive.

Set #10
 This set is the correct size lettering and numbering for the Orange paint scheme on the Annies Orange GP-35's.

Set #11
 This set will complete two 500 Series covered hopper in the Gray paint scheme.  This set has the black original numbers and white repaint numbers.

Set #12
 This set letters one 52' 6" Black Mill Gondola assigned to the Ann Arbor in the 1960's.  This set has white lettering.

Set #13
 This set goes on the Roberts & Schafer coaling tower.  The White on Blue portion of the set goes on the Hoist House and the White on Red portion goes on the Coal bin.

DT&I Santa Caboose
 This set is used to make the wooden Santa caboose used on the DT&I RR.  A good photo showing this caboose is on the December 1995 AARRT&HA calendar.  It is also given in the modeler's column, of Newsletter Volume 4 Issue #4 - 1998.